tube fitting
Selected tag
Tag Selection
- tube fitting (30)
- fitok (285)
- tube fitting elbows (4)
- swagelok (251)
- bulkhead locknut (1)
- tube fitting accessories (18)
- ferrule set (2)
- front ferrules (1)
- insert (1)
- knurled nuts (1)
- male nut (1)
- nut ferrule sets swagelok (1)
- nuts (2)
- nut & ferrules (1)
- o-ring (2)
- rear ferrules (1)
- gasket (4)
- fitting (1)
- caps (1)
- plug (1)
- vent protectors (1)
- cross (1)
- crosses (1)
- Ball Valve (16)
- Malaysia (6)
- 10000 psig (2)
- 1000 psig (1)
- Needle Valve (10)
- Non Rotating Stem (1)
- Excess Flow (1)
- Bleed Valve (2)
- Purge Valve (1)
- Strainer (5)
- Check Valve (8)
- filter (3)
- Tee Type (1)
Cracking pressure less that 2 psig (0.14 bar)
End connections - tube fitting, VCR face seal , tube butt weld
Straight, tee and cross body constructions
Working pressure up to 4000 psig (276 bar)
Stainless Steel, Brass and Carbon Steel
End Connections : 1/8'' and above
Stainless steel construction
End connections from 1/4'' to 1/2'' OD tubing ftting , VCR Face Seal and NPT end
316 SS, 316L SS, Alloy 400, Alloy and Brass
Working pressure up to 3000 psig for ND Series and 5000 psig for NDH Series
Stainless Steel
Seat Material is PTFE
Packing Material is PTFE
End connections from 1/8'' to 1'' thread
Working pressure up to 1000 psig
Flow patterns: 2 ways and 3 ways
Packing Material is PTFE
Seat Material is PCTFE, PEEK and PVDF
End connections from 1/4'' to 1'' size
Working pressure up to 10 000 psig (690 bar)